fbpx

MATRIX LEATHER

 

Print small volumes in response to shorter product cycles and the increasing demand for product differentiation.

Supply your customers with unique, innovative printed leather with photo realistic color reproduction.

No need for outsourcing means achieving shorter processing times and higher margins.

Fully Integrated solution with a minimal start-up investment cost.

Personalize print jobs by including logos, initials, pictures…

 

Increased Adhesion

No drying time needed, once printed your product is ready for further processing.

Highly Durable

Each print made with leather ink

is scratch and water resistant.

Those distinctive features make

our printer suitable for all

applications within leather industry

Highly Flexible

Matrix Leather Ink is especially

designed to withstand and physical constraint which might occur during further processing / usage.

FEATURES

SELECTIVE VACUUM

All Matrix Leather printers are equipped with vacuum table. Vacuum tables are separated into zones which can easily be turned on and off depending on size of the material.

IR LAMP

With the adjustable IR Lamps, leather technology is pushed even step further.IR Lamp is used to reduce surface tension of printed leather therefore allowing better ink absorption.Once effect of IR lamps wears off, printed leather will go back to normal and trap the ink inside the pores.Matrix Leather have adjustable IR lamp system which means you can adjust output to be the right one for each type

AUTOMATIC SUBSTRATE DETECTION (ASD)

Matrix Leather features
Automatic Substrate Detection System (ASD)ASD allows users to put any shapeof leather on the printer table and ina few seconds you will get the file with precise measurements how and where your design should be printed.

Azon Leather

Matrix Leather printers use high-quality ink which is easily absorbed into the pores of material. Standard configuration is CMYK + LC LM O G for achieving a wide spectrum of colors and providing a color vibrancy of any desired image or effect on the printed material.

 

 

 

SPECIFICATIONS

                                   MATRIX LEATHER 1216
SUBSTRATE
PRINT AREA 1200 mm x 1600 mm
47.24″ x 62.99″
ACCEPTABLE MEDIA 2100 mm x 1600 mm82.67″ x 62.99″
CLEARANCE 0,5 – 200 mm / 0,01″ – 7.87″
MAX WEIGHT 50kg/m2 (110.2 lbs/ft2), non-concentrated load
FIXTURE (VACUUM) 3 ZONES TABLE, 1 Pump
MATERIAL TYPE

REAL LEATHER

ARTIFICIAL LEATHER

PRINT
PRINT TECHNOLOGY Ink-Jet (On-demand piezzo)
DROP SIZE 7 – 21 pi
PRINT RESOLUTION

900 x 900 dpi

900 x 1200 dpi

1200 x 1200 dpi

SPEED 18 SqM / h , 193.75 SqFt / h
ABSOLUTE ACCURACY +/- 0.01 (0.3 mm) or +/- 3%from specific print distance
REPETABILITY +/- 0.008 (0.2 mm) or +/- 1%from specific print
INK CONSUMPTION CMYK LM LC G O 1.36ml / SqM
CMYK LM LC G O 1.36ml / 10.76 SqFt
INK
TYPE Azon Leather INK
CURING ADJUSTABLE PREHEATING SYSTEM
COLORS CYAN, MAGENTA, YELLOW, BLACK, LIGHT MAGENTA, LIGHT CYAN, GREEN, ORANGE
PRIMER INDUSTRIAL CERTIFIED POST PROTECTION (MATTE / VARNISH)
SUPPLY SYSTEM 440ml INK CARTRIDGE
INK CIRCULATION SYSTEM AZON / RICOH Circulation Technology (ACT)
SOFTWARE
RIP AZON RIP 64 bit
OPERATIONAL ENVIRONMENT
TEMPERATURE +15C to 30C / 59F to 86F
HUMIDITY 35 – 65% RH (non-condensing)
POWER 220V / 110V
STANDBY CONSUMPTION 95 W
MAX CONSUMPTION 3,5 kW
ASSEMBELED DIMENSIONS
(W x D x H) 2900 mm x 2450 mm x 1400 mm
114,17″ x 96.45″ x 55.11″720 kg / 1587 lbs
WEIGHT

 

 

 

Popups Powered By : XYZScripts.com